FINE TOOLS / BURNISHING TOOL / AG I 5 SINGLE ROLLER BURNISHING TOOL

 

 

AG I 5 Single Roller Burnishing Tool

Basic Tool Design :


               Type AG I 5 single roller burnishing tools consist of a tool body equipped with a tool shank, a spring assembly that allows the roller head to move with no play and very low friction, and a gauge that indicates the burnishing force as measured by spring deflection.

 

Application :


1. Roller burnishes bores with diameters of 47mm and large maximum rolling length : 80mm.
2. Roller head attached to the body's flexible, spring load - loaded section.
3. Roller head consist of a cage that guides the burnishing roller and a support roller with a large-scale needle bearing.
4. Cage also consist two spare rollers.

 

Total Type VDI Shank ∅ D (mm) Height (mm) Square Shank (mm) Basic Dimension (mm) Send Enquiry
h1 h2 p a b c d e l
AG I 5 30, 40, 50 63 81 - 90 20
25
32
150 60.2 102 44 43.5 80.7
 
CUTTING PARAMETERS :
Cutting Speed : 80 to 150 m/min
Feed Rate : 0.1 to 0.6 mm/rev
All dimensions are in mm, Other ranges on request

Advantages

The surfaces in quality of Ra is less than 0, 2 µm to be obtained.
Short cycle time.
Complete machining with one chucking.
Can be used as right or left - handed tool.
Both directions of rotation possible.
Best suitable for frequently varying job diameters.
Single tool can burnish any diameter.
Best quality CARBIDE Rollers is used for better life and performance.
Single pass operation.
Highly cost effective.
It is easy to change the spare part.
Process time is short.
It removes the second machine and personnel requirements.
It does not make sawdust.

Abhi Honing Tool
Abhi Burnishing Tool
Abhi Single Pass Honing Tool
Abhi Deburring Tool
Abhi Burroff Tool

Sitemap

© 2017 Abhi Fine Products | Design by Blazon

>