FINE TOOLS / BURNISHING TOOLS / AB - 313 FBT Series

 

AB - 313 Face Groove Burnishing Tool

This is a Face burnishing tool used for finishing top face of the parts, It can be made to based on work piece diameter specifications.

  • Face Burnishing Tool : AB-313
FBT Series

Ranges of Face Burnishing Tool : AB-313
Product code Nominal
Diameter ØD
Body dia CXK
mm
Max. Force
kN
Shank Send Enquiry
Min
Max
Morse taper
(STD)
Straight
(Optional) Ø dg6 x L1
AB-313-0420 4 20 Optional Optional Optional Optional
AB-313-2050 20 50 28 x 75 13.2 MT2 25 x 60
AB-313-5075 50 75 37 x 90 21.6 MT3 40 x 70
AB-313-75100 75 100 48 x 110 40.5 MT4 60 x 80
   
All dimensions are in mm, Other ranges on request

Advantages

Superior Surface Finish :
A Ra value of 0.05 to 0.2 can be achieved as against 0.5 to 3.5 through conventional methods like grinding, reaming, drilling, boring or turning.
High Repeatability :
Consistency in dimensional accuracy in microns can be maintained irrespective of volumes.
Enhances Productivity :
The tool processes components in seconds as compared to minutes taken by conventional methods like reaming, grinding, lapping or honing. As result of reduction in time, productivity can be maximized.
Improves Surfaces Hardness :
Metal squeezing process increase the surface hardness by about 5 – 10%.where has deep rolling thus the increase the surface hardness 20 to 30% are more.
Value for Money :
Higher productivity and lower time cycles translate to saving in costs. Also this process can be done by unskilled labor thus further saving on costs.
Low Investment :
Guide roller, rollers and cages etc. Can be replaced easily once worn out thus preventing the need to invest in new tool every time.
Enhances Surface Hardness :
Cold rolled condenses the grain structure of the metal thus resulting in hard corrosion resistant surface. The surface hardness increase to 5 to 10% are more with penetration of 0.25mm to 0.76mm. This increases the component life and improves fatigue resistance and surface hardness.
Compatibility :
Burnishing tools from Abhi can be used on both conventional and NC controlled machines. Also reduced friction, reduced noise level.

Abhi Honing Tool
Abhi Burnishing Tool
Abhi Single Pass Honing Tool
Abhi Deburring Tool
Abhi Burroff Tool

Sitemap

© 2017 Abhi Fine Products | Design by Blazon