FINE TOOLS / BURNISHING TOOL / AG5 - 40M - 45º SINGLE ROLLER BURNISHING TOOL
Basic Tool Design :
Type AG5 - 40M - 45º single roller burnishing tools consist of a tool body equipped with a tool shank, a spring assembly that allows the roller head to move with no play and very low friction, and a gauge that indicates the burnishing force as measured by spring deflection.
1. Roller burnishes cylindrical surfaces with connecting fillet radii up to the work piece face.
2. For low and mid - level strength materials.
3. Tool body's spring assembly positioned at an angle to 45º angle to work piece surface.
4. Roller head attached to the tool body's flexible, spring loaded section.
The surfaces in quality of Ra is less than 0, 2 µm to be obtained.
Short cycle time.
Complete machining with one chucking.
Can be used as right or left - handed tool.
Both directions of rotation possible.
Best suitable for frequently varying job diameters.
Single tool can burnish any diameter.
Best quality CARBIDE Rollers is used.
Single pass operation.
Highly cost effective.
It is easy to change the spare part.
Process time is short.
It removes the second machine and personnel requirements.
It does not make sawdust.