Rocker Arm
Advancements
Manufacturers are continually pushing the envelope in regard to what can be accomplished with the single pass Honing Process. Improved tool, fixture and ma- chine designs have allowed for increased production rates as well as improved bore precision. The following are some of the latest advancements that have been made.
Higher Productivity
The key to the single pass Process is to allow the diamond tooling to follow the existing cen- terline of the bore to be finished with as little pressure as possible. This is normally done by allowing the part to float along with the fixture to achieve the bore sizes and geometry.
Case History:13
| Material | SCM420 | Hardness | 59-63HRC |
| Bore Type | Through Bore | Stock Removal | 0.060mm |
| I/P Diameter | Ø9.95(+0.015) | Length | 40mm |
| Tool 1 | Ø9.975 | Grit | BV |
| Tool 2 | Ø9.990 | Grit | BV |
| Tool 3 | Ø10.00 | Grit | BV |
| Tool 4 | Ø10.010 | Grit | BV |
| Tool 5 | Ø10.015 | Grit | BV |
| Tool 6 | Ø10.020 | Grit | BS |
| BORE DIMENSIONS | REQUIRED | ACHIEVED |
| Size | Ø10 (+0.035 / +0.015) | Ø 10.02 |
| Taper | 0.003mm | 0.001mm |
| Ovality | 0.002mm | 0.001mm |
| Surface Finish | 0.8Ra | 0.4Ra |
| Machine Type | AB 608 (6-Spindle 8-Station) |
| Coolant | ABHI HONING OIL (AB 150) |
| Production | 120 Nos / Hour |
Tell us how can we assist you?
We are always happy to answer any questions!
Just fill in the form and we will get back to you.
© 2024 Abhi Fine Products. All rights reserved.
Designed & Developed by Appac Mediatech Pvt Ltd